Node Adapter Display

Note
PCB is available now. Price is 1000Yen (include shipping charge). I prepare five sets of all parts. Price is 6000Yen (include all parts, PCB and shipping charge).If you are interesting this PCB, please contact me.!

I change the RTC from RTC-8564(Epson Toyomura) to DS3234S (Maxim).

You can set the default value of your node adapter with this display.

RF header display (using rs232c port of node adapter with command mode) Photo of RF Header Photo of Delay Time set

New Version (DS3234 version & RS232c Bootloader mode)
This bootloader is AN1310 of Microchip.
Circuit diagram (V2)
Parts List (V2)
Hex file V00.19 (you mount the tact switch on parts surface.)
Hex file V00.19 (you mount the tact switch on solder surface and change the left and right.)
Hex file V00.19 (you mount the tact switch on solder surface and change the up side down. See above photo.)
You must update V07.54 or later firmware of your node adapter.
Bootloader hex file
Update program
Bootloader Document (see step 2)

Date & Time setting program
Display_timeset.exe
Connect the node adapter and the display unit with RS232C(Nornal cable), the node adapter and PC with USB cable. And executer this program. Date and time will be set the date and time of PC.

Data Sheet
PIC18F2620
DS3234 RTC
LCD SC2004C

Note: You must use the normal RS232c cable between node adapter and display when you use display mode.
You must use the revirse RS232c cable between PC and display when you use firmware update.
Programed PIC (PIC18F2620) is available. If you need this, please contact me.

Old Version (RTC-8564 version)
Circuit diagram
Hex file (V00.05 Alpha version)

You must update V07.44 or later firmware.
Command format
RF received sample

DS3234 version
Circuit diagram (V2)
Hex file (V00.06 Alpha version)

You must update V07.44 or later firmware.

node_update_client.02.09.zip
This program is supported the updating for test version of node adapter. Please execute the following command. "node_update_client -p 889" (add the "-p 889" Default is "-p 888".)

How to get the latest Firmware of node adapter
1. Please download the node_update_client.02.08.zip of later version (see above).
2. unzip node_update_client.02.08.zip Must be writable holder.)
3. Run node_update_client.exe -p 889
Don't forget "-p 889".

Mod. History.
1. Added the display of received history. (keep 68 records.) V00.02
2. You can set the all default parameter. V00.03
3. Added the S/N value display. V00.04
4. Bootloader support. (AN1310 of Microchip bootloader) V00.10